I was reading on the archive pages that a member of the forum was planning to construct the whole London transport network on the London Map...
After 3 months I have done it! Full Underground, Mainline and Suburban Railway (incl. London Overground), Tramways, DLR (using monorail), and Thames Riverboat Services; I have also built the major motorways, 'A' roads, airports, and Thames bridges/tunnels. All the routes have been tested and have one unit working on them at present.
I am currently working through the 800+ bus routes which I am having to shorten in some cases to avoid congestion in the City, Westminster, Camden, and Lambeth areas. The Underground in some areas has been built on elevated lines due to the heightfields relation to the river, but I can probably raise land and amend them with time.
Sweet, can you post the save game or a link to it please? I'd love to play it, as i live just outside London :)
Stubbsy,
I have had problems uploading it because it is 10.8 MB. As there is a new saved game site set up I have contacted admin to see how I can get it uploaded to there so that you can download and play it. I will also upload/email the PAK that I use as it has some stuff from the Japanese Add-ons site and various other PAK files that don't come with the standard PAK folder.
There are some free file hosting sites you could use.
http://www.filefront.com/
Patrick thanks for that, seems to have worked a treat.
Stubbsy: PAK 64 on version 99.17.1 (have not tried it on 100.0); the link to obtain the saved game is:
http://files.filefront.com/London+AAAsve/;11778985 New link added in post below
I have also uploaded the PAK file as a RAR , the link to obtain this is:
http://files.filefront.com/pakrar/;11779204/fieli New link added in post below
I am working on bus routes (RailAir, Greenline, and London buses) at present, will upload once this is done and tested, although TfL bus stations are on. Rail route numbering (R xxx) relates to the National Rail Timetable number. Any problems or questions let me know.
This is ... big. Really big! And impressive.
For placing the city buildings, you could use the new map editor in version 100.x. But it may be faster to modify the distribution algorithm in the program (so it fills the map automatically following a given pattern) instead of doing it by hand.
Quote from: whoami on September 13, 2008, 05:03:25 PM
This is ... big. Really big! And impressive.
For placing the city buildings, you could use the new map editor in version 100.x. But it may be faster to modify the distribution algorithm in the program (so it fills the map automatically following a given pattern) instead of doing it by hand.
Thanks Whoami.
As I am building bus routes I am letting the map do its 'own thing' in terms of building, I have also set up freight connections as my aim is that it will eventually turn a profit. I have now also added the Ruislip Lido Railway which I realised today was missing. Also I note that there is bus congestion on the uploaded saved game, I am going to address this by uploading a new version of the saved game with the first 100 bus routes on after testing for congestion.
Did you try it with version 100.0 and did it work ok?
Is there any photo's of this???
Edit: It works with the latest one out when this message was written.
The latest map is attached with over 100 bus routes on and extensions to Tramlink, Crossrail added, etc. Basically the map is now based on TfL's 2025 'wish-list' with some closed railway lines added. The PAK has been enlarged that applies to this game also. The Greenwich Transit is built as a tram route with services over the Thames Gateway bridge at Thamesmead however no service has been added to it yet as I have not used this game since Christmas having worked on a similar project for North of England.
Link for saved game:
http://files.filefront.com/London+Csve/;13666188;/fileinfo.html (http://files.filefront.com/London+Csve/;13666188;/fileinfo.html)
Link for PAK:
http://files.filefront.com/pakrar/;13666217;/fileinfo.html (http://files.filefront.com/pakrar/;13666217;/fileinfo.html)
Pictures also attached at low res of some areas on the map.
Does it work on the latest version - 102 ?
Edit: hmmm. Using linux, 102, pak64 but :
FATAL ERROR: quickstone<T>::find_next()
no free index found (size=8192)
any ideas?
It looks awesome
This game has 8577 stations.
If you want to load this savegame in v102, you need to change
stations value in simuconf.tab, I think.
Or, use latest nightly. Latest nightly multiplies automatically.
Quote
#################################program stuff##################################
# max number of stations (just the amount of internal handles)
stations = 8192
what do i change it to?
Edit: i changed it to 16384, but I'm now getting segmentation faults :(
Very sorry, I didn't test it.
Now I tried with 102.0 and 'stations = 10240' was Okay for me.
16384 is also no problem for me.
And as I wrote, if you will use the latest nightly versions of simutrans, you don't need to change this value (This value doesn't exist in simuconf.tab anymore.)
Quote from: Maragil on May 03, 2009, 03:19:20 PM
Edit: i changed it to 16384, but I'm now getting segmentation faults :(
I don't know that is the same problem or not. Did you use regbombay1's PAK set ?
used his pak set and it worked.
Reg, This is amazing!
My apologies to all, should have mentioned if you are using an earlier Simutrans version then the maximum number of stations and convoys needs changing to a higher value.
sorry to bump this up, but the download links are dead :(
no one? :(
The person who created it was last active on 11 November. Either they'll come back in see this, or they won't. Sorry.
thats a real disappointment :(
anyone know how to make my own map based on london?
I would think some research into London's transport networks would be the best place to start. Underground system maps, above ground rail lines, bus routes, motorways, etc.
I also think I created a London map way back for Timothy. I think that is a good start as well.
Quote from: Joker on December 03, 2009, 11:01:37 PM
I would think some research into London's transport networks would be the best place to start. Underground system maps, above ground rail lines, bus routes, motorways, etc.
I also think I created a London map way back for Timothy. I think that is a good start as well.
if there is a ready one, I wouldn't mind taking it at all (even if its a complete save game). I live in london so know all the ins and outs and secrets in transportation in london :p
You Can find the map here. I only made it in one size. IIRC it actually is a very large map.
Good luck and enjoy :)
http://maps.simutrans.com/europe.html
Cheers Joker
Quote from: Joker on December 04, 2009, 01:39:01 AM
You Can find the map here. I only made it in one size. IIRC it actually is a very large map.
Good luck and enjoy :)
http://maps.simutrans.com/europe.html
Cheers Joker
is there a way to place the cities and stuff before playing the game?
No, there isn't. Only the general shape of the land (and water) can be set with these maps. All objects (ways, buildings, vehicles, cities, trees, etc.) can only be added in-game.
Quote from: DirrrtyDirk on December 04, 2009, 02:19:47 PM
No, there isn't. Only the general shape of the land (and water) can be set with these maps. All objects (ways, buildings, vehicles, cities, trees, etc.) can only be added in-game.
is it planned to add this feature in the future?
Quoteis it planned to add this feature in the future?
No, because the "stuff" belongs to a pakset which you should select first.
What you can do is start a new game and pause it immediately. Then start building.
Don't forget if you change to public services player you get the map editor tools (to allow you to place new stuff, and even set up factories and connections with more freedom).
^how to we get into the map editor?
That depends on which pakset you're using... But generally you have to switch over to the public service player in the game and then you should be able to find another tool button in the menu or in special construction tools menu.
in pak128.Britain:
Click on the crane icon, then click P+ icon until you see the "lines" button on the top menu change to an icon of a world with a key on top. You are now the public service player. Click on this new icon, and that's the map editor.
My apologies, haven't read this post in a while.
WIll get the London network back up with a link by next week.
It's been WAY over a week!
Link is attached below:
http://www.filehosting.org/file/details/114686/London_F.sve
PAK File: http://www.filehosting.org/file/details/114716/pak.rar
I have not worked on this for a year.
Also by way of an apology attached is a North of England network based on the National Rail Timetable, and light rail operations which may be interesting, with authentic platform layouts for a number of stations including Sheffield Midland and Carlisle Citadel.
http://www.filehosting.org/file/details/114694/North_of_England_C.sve
PAK File: http://www.filehosting.org/file/details/114716/pak.rar
your links are dead ???
Hi All,
Has anyone got an old copy of the saved game of London that regbombay1 made?
http://forum.simutrans.com/index.php?topic=402.0
Im dying to play it!!!
Cheers,
BH
Hi, I have an old copy "London_F", I don't know if it's the good because I can't verify with it because I got an error but you can try yourself with addons and some older versions.
Here the link where I upload it again : http://www.gamefront.com/files/20348044/London_F.sve (http://www.gamefront.com/files/20348044/London_F.sve)
Thanks Guillaume
I suspect I will need his Pak file to get this working, anyone got a copy? Or know which Pak I need to get it running?
Cheers,
BH
I tried several versions without addons as 102.2.2 101 100 99.17.1 but no one is able to run any of my saved games that I did several years ago and this one ??? As I only play pak128, I don't know if there are some addons that are useful... But I suspect a bigger problem because I have saved games pak64 without addons, and I can't play with it...
Hmmm I like you can't seem to get this save file running, trying various versions.
I wonder if you can find out what paks have been used in a save file?
Or maybe on of the experts in Simutrans can get it working for us?
Cheers,
BH
Can anyone help?
I would be very appreciative if someone can get this running!
Cheers,
BH
Did you follow the instructions and install the proper pak file? anyway, I'm afraid the problem is that the savegame is not compatible with the latest Simutrans version. You can always try to make it by yourself... :::)
eidt:
ignore this post
the original post was ment to be somewhere else
removal of post please
dead links.
can it be uploaded again, i wold very much like to play it
Link for saved game:
http://files.filefront.com/London+Csve/;13666188;/fileinfo.html
Link for PAK:
http://files.filefront.com/pakrar/;13666217;/fileinfo.html
these links are dead
Jap train fan, you can found the savegame at the link of my post above. But I don't have the paks... Try with some addons of that time because no one know actually...
thanks
if you get it working let us know.
good luck!
Could someone upload the savegame and pak files? I know this is very old, but I am really dying to have a look at it.
I've never seen the save game. But I am very, very slowly doing something similar, with the trains at least. Save game one day!
The last time this person was on here was: May 13, 2011
This is dead!
I've checked nearly all of my old HDD, I don't have it anymore. I still have one old HDD to check, if I have it, I'll post it.
Do. Not. Beg.