Started by Junna, June 30, 2013, 04:06:03 PM
0 Members and 1 Guest are viewing this topic.
Quote from: jamespetts on July 07, 2013, 03:11:34 PMYou had not set the export script to use vehicle alignments, which is why it was not automatically aligned to start with.
Quote from: jamespetts on July 07, 2013, 03:30:03 PMHmm - I'm not sure why it's off. Sadly, I don't have any more time to-day to look into this, as I have to travel this evening. My renders of your LMS EMU appear correct, so I am not sure what the problem would be with the Tyneside units.
Quote from: The Hood on July 09, 2013, 04:57:43 PMGreat to see a new graphics artist in the making - I've not got time to get these into standard at the minute but I'll add it to the list of things to include. I'd echo kierongreen's comments though - if you fancy turning your hand to buildings (factories/attractions/citybuildings all need expanding) that would be great! But of course just draw what you want to see included in the game and it will make its way in.
Quote from: kierongreen on July 09, 2013, 07:57:36 PMRegarding a housing estate attraction, the problem with that is that it will look identical everywhere it pops up. When houses are placed individually as the city expands then a lot more variety in layout is possible. Shopping centres, churches, museums are all possibilities for attractions though - and more city buildings are always welcome.
Quote from: jamespetts on July 11, 2013, 10:01:40 PMThat looks good. Did you get around to calibrating the physics in the .dat file?
Quote from: Junna on July 11, 2013, 11:56:16 PMWell I guess extrapolating the force from similarly proportioned locomotives would give a power of around 450-550kw, so gave it 512 (and changed speed to 140km/h).
QuoteHow come the steam trains have such low outputs, anyway? There's always quotes of the A4 and A1 having well over "2200 horse power", but they end up with 700kw - were they that low?
Quote from: jamespetts on July 12, 2013, 01:30:14 PMDid you use the spreadsheet to which I referred you earlier in this thread? All steam locomotives need to be calibrated using the spreadsheet.
Quote from: jamespetts on July 12, 2013, 11:59:21 PMThank you. May I ask - why do you comment out the retirement dates in your .dat files?