The International Simutrans Forum

 

Author Topic: Passengers disappear on hub station arrival  (Read 2015 times)

0 Members and 1 Guest are viewing this topic.

Offline Zeno

  • ENASSA Designer
  • Devotee
  • *
  • Posts: 1997
    • Zeno's Simutrans Creations
  • Languages: ES, EN, CAT
Passengers disappear on hub station arrival
« on: July 21, 2013, 03:06:43 PM »
Hi all. I have just installed 11.1 and I found that a bus full with 60 people landed on a station where 50 should have been waited for an intercity bus, but they just went off the bus and disappeared. Unfortunatelly that sounds pretty much like the cargo transfer bug reported few days ago, which is supposed to be fixed in this new version.

I guess this has nothing to do with the max wait times and that stuff, if so, they wouldn't have been generated, or at least they would have waited a bit in the station before disappearing, am I right?

Offline jamespetts gb

  • Simutrans-Extended project coordinator
  • Moderator
  • *
  • Posts: 18583
  • Cake baker
    • Bridgewater-Brunel
  • Languages: EN
Re: Passengers disappear on hub station arrival
« Reply #1 on: July 21, 2013, 04:01:14 PM »
Can you upload a saved game in which this can be reproduced? I should be most grateful. Thank you for the report.

Offline Zeno

  • ENASSA Designer
  • Devotee
  • *
  • Posts: 1997
    • Zeno's Simutrans Creations
  • Languages: ES, EN, CAT
Re: Passengers disappear on hub station arrival
« Reply #2 on: July 21, 2013, 08:37:41 PM »
Will you need the used addons too?

Offline jamespetts gb

  • Simutrans-Extended project coordinator
  • Moderator
  • *
  • Posts: 18583
  • Cake baker
    • Bridgewater-Brunel
  • Languages: EN
Re: Passengers disappear on hub station arrival
« Reply #3 on: July 21, 2013, 08:42:34 PM »
I think that I probably better had have them to make sure that I can reproduce your situation exactly.

Offline Zeno

  • ENASSA Designer
  • Devotee
  • *
  • Posts: 1997
    • Zeno's Simutrans Creations
  • Languages: ES, EN, CAT
Re: Passengers disappear on hub station arrival
« Reply #4 on: July 21, 2013, 08:57:38 PM »
Let me know if this is enough. Thank you.
The problem can be seen at Lloret bus station.
The file: http://simutrans-germany.com/files/upload/exp.7z

Offline jamespetts gb

  • Simutrans-Extended project coordinator
  • Moderator
  • *
  • Posts: 18583
  • Cake baker
    • Bridgewater-Brunel
  • Languages: EN
Re: Passengers disappear on hub station arrival
« Reply #5 on: July 21, 2013, 09:02:28 PM »
To which pakset ought this addon be added?

Offline Zeno

  • ENASSA Designer
  • Devotee
  • *
  • Posts: 1997
    • Zeno's Simutrans Creations
  • Languages: ES, EN, CAT
Re: Passengers disappear on hub station arrival
« Reply #6 on: July 21, 2013, 10:18:12 PM »
I'm sorry. Pak128 standard.

Offline jamespetts gb

  • Simutrans-Extended project coordinator
  • Moderator
  • *
  • Posts: 18583
  • Cake baker
    • Bridgewater-Brunel
  • Languages: EN
Re: Passengers disappear on hub station arrival
« Reply #7 on: July 21, 2013, 10:59:59 PM »
Hmm, I can't reproduce this. When I try to run it, however, the inter-city coach arrives a fraction of a second after the town 'bus and picks up all the passengers for remote destinations; is this what you might have seen?

Offline Zeno

  • ENASSA Designer
  • Devotee
  • *
  • Posts: 1997
    • Zeno's Simutrans Creations
  • Languages: ES, EN, CAT
Re: Passengers disappear on hub station arrival
« Reply #8 on: July 22, 2013, 07:43:35 AM »
Nope. The intercity arrived when the other bus was really far away. I never seen those passengers going to the townhall in the stop; similar thing in reverse order: people getting the urban bus which went to the second town in the intercity line were dropped ok, but the ones that wanted to go to the town in the middle of the intercity route were never seen at the bus station.

I'm not using a full clean install; main config file probably hasn't been cleaned and might be the same I used for 11.0. Could that be the source of the problem rather than a bug??

Offline jamespetts gb

  • Simutrans-Extended project coordinator
  • Moderator
  • *
  • Posts: 18583
  • Cake baker
    • Bridgewater-Brunel
  • Languages: EN
Re: Passengers disappear on hub station arrival
« Reply #9 on: July 22, 2013, 09:11:30 AM »
The configuration files should not make a difference, as the settings are saved with the saved game. May I ask - in the saved game that you supplied, does the bug occur for you reliably upon one of the two 'buses first stopping at the interchange 'bus stop after the game loads? If so, which one?

Offline Zeno

  • ENASSA Designer
  • Devotee
  • *
  • Posts: 1997
    • Zeno's Simutrans Creations
  • Languages: ES, EN, CAT
Re: Passengers disappear on hub station arrival
« Reply #10 on: July 22, 2013, 09:30:19 AM »
It happens with both buses: the urban one will only drop passengers for the final destination (town, palamós I think it's its name), and not for the one in the middle of the intercity route; the intercity bus will drop no passengers to the bus station. At least that was what I was able to see yesterday, I will be able to give you more details this evening when I'm back home.

Offline jamespetts gb

  • Simutrans-Extended project coordinator
  • Moderator
  • *
  • Posts: 18583
  • Cake baker
    • Bridgewater-Brunel
  • Languages: EN
Re: Passengers disappear on hub station arrival
« Reply #11 on: July 22, 2013, 09:39:18 AM »
Thank you - the more detail the better. Edit: Can you let me know also which version of Pak128 that you are using?
« Last Edit: July 22, 2013, 10:03:17 AM by jamespetts »

Offline Zeno

  • ENASSA Designer
  • Devotee
  • *
  • Posts: 1997
    • Zeno's Simutrans Creations
  • Languages: ES, EN, CAT
Re: Passengers disappear on hub station arrival
« Reply #12 on: July 22, 2013, 10:39:31 AM »
Probably I used latest sources of pak128 to compile a custom version. I don't keep a register of all changes, but vehicles and goods have chances of being modified.
I could also 7zip the whole pak and make it available for you to download, if it will help.

Also, later I can try to do a clean install and see if it still reproduces.

Offline jamespetts gb

  • Simutrans-Extended project coordinator
  • Moderator
  • *
  • Posts: 18583
  • Cake baker
    • Bridgewater-Brunel
  • Languages: EN
Re: Passengers disappear on hub station arrival
« Reply #13 on: July 22, 2013, 10:49:14 AM »
I think that I have found and fixed this on the 11.x branch: the problem was that, whenever there was an intermediate transfer stop in walking distance of the passengers' ultimate destination, the passengers would automatically disembark there, even if they were bound to change for transport to take them closer to their destination. This is now fixed on the 11.x branch.

Offline Zeno

  • ENASSA Designer
  • Devotee
  • *
  • Posts: 1997
    • Zeno's Simutrans Creations
  • Languages: ES, EN, CAT
Re: Passengers disappear on hub station arrival
« Reply #14 on: July 22, 2013, 11:21:09 AM »
Aaah. I understand this fix wasn't present in the 11.1 release, was it?

Offline jamespetts gb

  • Simutrans-Extended project coordinator
  • Moderator
  • *
  • Posts: 18583
  • Cake baker
    • Bridgewater-Brunel
  • Languages: EN
Re: Passengers disappear on hub station arrival
« Reply #15 on: July 22, 2013, 11:28:48 AM »
No - I have fixed it in the last hour or two.

Offline Zeno

  • ENASSA Designer
  • Devotee
  • *
  • Posts: 1997
    • Zeno's Simutrans Creations
  • Languages: ES, EN, CAT
Re: Passengers disappear on hub station arrival
« Reply #16 on: July 22, 2013, 12:16:02 PM »
Oh!! You're the man!!  :award:

Offline jamespetts gb

  • Simutrans-Extended project coordinator
  • Moderator
  • *
  • Posts: 18583
  • Cake baker
    • Bridgewater-Brunel
  • Languages: EN
Re: Passengers disappear on hub station arrival
« Reply #17 on: July 22, 2013, 01:05:04 PM »
Thank you!