The International Simutrans Forum


Author Topic: Non level crossing on level -1 / -2  (Read 545 times)

0 Members and 1 Guest are viewing this topic.

Offline hreintke

  • *
  • Posts: 168
Non level crossing on level -1 / -2
« on: December 01, 2018, 02:32:39 PM »

I have an underground train/rail (level -1) which needs some crossings.
Can use the normal crossings with signs to protect but would like to have non-level crossings (using level -2)

Is there a way to achieve that ?

As far as I know now, there is no way to go from level -1 to level -2.
Also when I build a level -2 tunnel/rail from the base (level 0) , I cannot connect that to the level -1 rail

Offline Leartin at

  • Devotee
  • *
  • Posts: 1269
  • PAK-DEV P192C
  • Languages: DE, EN
Re: Non level crossing on level -1 / -2
« Reply #1 on: December 01, 2018, 03:48:23 PM »
there are some buttons for landscaping in the menu, one of them usually makes a one tile hole and one of them creates a one tile plateau. You can use those on underground ways in order to have them change to a lower or higher level. In sliced mode, be aware that using those tools moves your way on a different level, so it seems to disappear.

Offline hreintke

  • *
  • Posts: 168
Re: Non level crossing on level -1 / -2
« Reply #2 on: December 02, 2018, 08:59:43 AM »

Needed a good reading of your answer.
The detail is in the on underground ways

What I did was using the tools on an empty tile, as it is done on level 0. And that is just doing nothing.
Using it on the end of the rail/track does the trick.