Art deco tram bridge problems

[Václav]

So, art deco tram bridge is almost finished. Let's say that now I only need to slowly change colours, correct borderlines or so. But few things still look very strange.

At first, in north-south direction wrong front images are used for middle part. I checked dat file many times and I was not able to find source of this wrong image usage.

And also, pillars are missing - even if they are available. But this may be my mistake and it is not possible to assemble pillars as I planned. I thought that top part of pillars (noticeable on northern and western ramps) would be permanently present on middle parts - and beneath middle parts would appear simple pillars. But it seems it is not possible and I have to add those arches (visible on ramps) add to pillars - that would lead to repeating those arches too (even if I would like rather to have only simple pillars).

[prissi]

Code Select Expand

FrontImage[NS][0]=./Tramway_96_75_ArtDecoBridge_FullSlope.2,1,0,12The 2,1 must be a dot, otherwise it takes image 2 in the first row ...

[Václav]

Thanks. One comma I did not notice - and what a problem. One problem solved.

And now only to solve problem with pillars. Then I can continue on finishing works.

SOLVED: pillars solved too. They had set wrong direction.