The International Simutrans Forum

Community => Simutrans Help Center => Topic started by: hreintke on December 01, 2018, 02:32:39 PM

Title: Non level crossing on level -1 / -2
Post by: hreintke on December 01, 2018, 02:32:39 PM
Hi,

I have an underground train/rail (level -1) which needs some crossings.
Can use the normal crossings with signs to protect but would like to have non-level crossings (using level -2)

Is there a way to achieve that ?

As far as I know now, there is no way to go from level -1 to level -2.
Also when I build a level -2 tunnel/rail from the base (level 0) , I cannot connect that to the level -1 rail
Title: Re: Non level crossing on level -1 / -2
Post by: Leartin on December 01, 2018, 03:48:23 PM
there are some buttons for landscaping in the menu, one of them usually makes a one tile hole and one of them creates a one tile plateau. You can use those on underground ways in order to have them change to a lower or higher level. In sliced mode, be aware that using those tools moves your way on a different level, so it seems to disappear.
Title: Re: Non level crossing on level -1 / -2
Post by: hreintke on December 02, 2018, 08:59:43 AM
Thanks,

Needed a good reading of your answer.
The detail is in the on underground ways

What I did was using the tools on an empty tile, as it is done on level 0. And that is just doing nothing.
Using it on the end of the rail/track does the trick.