I saved my Simutrans pak128 world in V123, and opened it in the new version 124.1.
There are many small changes, which I appreciate, but there are also regressions:
In Simutrans pak128 V123, I could lay rails over an elevated track from a flat ground. That does not seem to work any more in V124.1.
See screenshot - I want to connect the tracks over the elevated rails.
The second example shows a connection to an elevated track, created with V123, that I can destroy, but not recreate in V124.1.
I think this is the related change:
https://forum.simutrans.com/index.php/topic,22929
Indeed, this seems to be the same problem: https://forum.simutrans.com/index.php/topic,22929.msg206791.html#msg206791
Maybe r11282 fixes this without allowing to connect to bridge ramps again.
Quote from: prissi on June 06, 2024, 08:45:17 AMMaybe r11282 fixes this without allowing to connect to bridge ramps again.
Oh I fear :o
(https://makie.de/dia_bruecke.png)
(https://makie.de/dia_bruecke3.png)
Connecting to bridges like that was probably working already before r11282,
EDIT: try r11283
not good ::(
bridges are built with a piece of normal track. If you blow up the piece of track then you can no longer connect to the bridge.
(https://makie.de/dia_bruecke2.png)
Sorry, works for me with the modification.
it seems a little bit tricky,
at pk64 and pak128 it works
at pak128.german it works if you drag over the bridge
but not if try to connect to the near slope
It is mystery why it worked for pak64 and not pak128.german, but now it should work for both.
This looks very good. 8)
It works as I expect.
I can't find any more problems.
Thank you very much.