Started by fam621, November 16, 2017, 08:14:58 PM
0 Members and 1 Guest are viewing this topic.
Quote from: SouthernTransport225 on September 30, 2018, 11:07:59 AMUnfortunately, there is no source which provides tractive effort. But the trains do have very good acceleration both on and off electric mode (as in they have just as good of acceleration on diesel mode)
Quote from: SouthernTrains100 on October 22, 2018, 11:53:17 AMIn my opinion, I think that the Class 800/801 IETs might have near enough the same tractive effort as the Class 385s
Quote from: jamespetts on October 23, 2018, 11:33:24 AMYou mean the livery scheme? You can certainly add one of those: just add one to the end of the livery schemes section in the pakset specific simuconf.tab. You will see the correct format by looking at the others.As for the acceleration being "very good", as I believe has been discussed on this thread now quite a number of times, such vague information is unusable. I need numerical data for calibration. Please do not keep asking me to adjust the tractive effort based on unusable vague information. If you have numerical data on actual acceleration rates on the flat with a specific configuration/formation, you can run your own tests in-game to deduce the correct tractive effort by testing to see whether it accelerates to the given speed within the correct number of tiles at 125m/tile based on the source data, and, if it does not, adjust the tractive effort multiplier in the advanced settings dialogue (press the "i" key to access) until it is correct. This multiplier can then be reset in the advanced settings dialogue but multiplied by the tractive effort figures given in the class 800's .dat files. If you do this, you will need to give me full information on the numerical source so that I can verify its accuracy, and also upload the saved game that you used for testing.
Quote from: SouthernTrains100 on October 23, 2018, 07:35:06 PMWhere can I find these .dat files?
QuoteWhen you clone the Github repositories in the relevant part of the tutorial, use this link for the .png and .dat files (i.e. the pakset repository):https://github.com/jamespetts/simutrans-pak128.britain.gitand this link for the 3D models:https://github.com/jamespetts/Pak128.Britain-blends.git
Quote from: thegamer7893 on April 05, 2019, 12:49:56 PMComing back to this (after some while), will it be possible to make the class 800/801 have the same livery variants.
Quote from: jamespetts on April 05, 2019, 01:12:51 PMIf you would care to modify the files accordingly and test them, I should be happy to include such a change.
Quote from: thegamer7893 on April 05, 2019, 04:11:47 PMThe only thing is now is that the IET fleet will not carry Virgin livery and now carry the LNER livery and also that I am no good at doing such stuff.