News:

Simutrans.com Portal
Our Simutrans site. You can find everything about Simutrans from here.

Velodrome

Started by ӔO, January 10, 2010, 06:00:30 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

ӔO

here is a preliminary 3d model of a multi-use velodrome.
still missing a lot of details...
My Sketchup open project sources
various projects rolled up: http://dl.dropbox.com/u/17111233/Roll_up.rar

Colour safe chart:

The Hood

Looking promising.  Would remove shadows and possible make the stands more curvy rather than in straight segments (if you understand).  It may also be a tad bright for pak128.Britain style, but let's see it in game first.

ӔO

curvy stands?
like what the track looks like?
I'm not entirely sure what you mean because the stands are just one big circle and look like a baumkuchen.

do you mean the shadow on the building or shadow on the outside floor? shadow on the floor is easy to remove, but when shadows are gone in sketchup the lighting becomes right next to the camera.

looks like this with no shadows,
My Sketchup open project sources
various projects rolled up: http://dl.dropbox.com/u/17111233/Roll_up.rar

Colour safe chart:

The Hood

I was trying to say that the stands might look better with a smoother edge, at the minute there are definite straight sections linked together (viewed from above).  Anyway, looks better without the shadow, but I've also just realised the light needs to come from bottom left rather than left (as I think it is doing in your images so far).

ӔO

ah, I see, the 'circle' isn't very circle.
that's more of a limitation of sketchup since I can't define how many points the circle will be made up of.
lighting is also a limitation of sketchup.

I'll see what I can come up with to work around those two issue.
My Sketchup open project sources
various projects rolled up: http://dl.dropbox.com/u/17111233/Roll_up.rar

Colour safe chart:

AP

Just looking at it, maybe the faceting of the circle in the CAD software won't be an issue once the image is scaled into the game anyway.

Václav

This is another building usable also in other paks (separately form british pak). But inside is often technical support for riders, not tennis (and ?volleyball) courts.

Chybami se člověk učí - ale někteří lidé jsou nepoučitelní

ӔO

@vaclav

yes, you're right. velodromes usually don't have other sports courts inside, but some modern ones have been retrofitted with them along with a new tent/tarp sort of roof.
it's no big deal to remove those courts and place tech support in there since it's just painted on.

@AP
it no big deal to double the points in the circle. I'll just use two circles of the same size with a slight offset to double the edges.
My Sketchup open project sources
various projects rolled up: http://dl.dropbox.com/u/17111233/Roll_up.rar

Colour safe chart:

ӔO

a version 2


unfortunately, all the details, like bikes, are lost even at this size
My Sketchup open project sources
various projects rolled up: http://dl.dropbox.com/u/17111233/Roll_up.rar

Colour safe chart:

Václav

OK. Much better. But could you explain white line upon upper edge of race track?

Chybami se člověk učí - ale někteří lidé jsou nepoučitelní

The Hood

Circular stands look much better.  My 2 cents:
1) Brick texture looks too coarse, can you make it finer?
2) Maybe put a roof on?  Aren't most velodromes enclosed?  That would also partially remove the problem of having bikes in the middle, although maybe for effect the roof should be transparent so you can see the track...

vilvoh

Perhaps a good solution would be a transparent roof, to see the inside.

Escala Real...a blog about Simutrans in Spanish...

ӔO

white lines: that would be the wall that separates the track from the stands. it's just unpainted, I'm undecided on a colour. there are usually advertisements on these boards.

brick texture: I think it was just the zoom level that made it look like that, I'll try and find a better brick texture for this size. how's the colour for the bricks? use something redder or keep it the way it is?

roof: some are enclosed, some are not, but usually the stands are covered.
open tracks usually have some sort of asphalt or asphalt-concrete track and the field might be dirt or grass. enclosed ones usually have wood everything, except the structure itself and the roof.
I can split it into two types, seeing as the hard part is already done, which is the track.
enclosed, partial dome covering the stands and the center bit made of glass or similar?
open field, different textures for track and ground?
My Sketchup open project sources
various projects rolled up: http://dl.dropbox.com/u/17111233/Roll_up.rar

Colour safe chart:

The Hood

As for the brick texture, it's a good colour, just needs to be a finer scale.  There must be away to adjust this in sketchup?

Roof: Go for what you want then.