The International Simutrans Forum

 

Author Topic: Time space between two bus terminals  (Read 2077 times)

0 Members and 1 Guest are viewing this topic.

Offline Václav

  • Devotee
  • *
  • Posts: 3230
  • formerly VaclavMacurek
  • Languages: CZ, EN
Time space between two bus terminals
« on: June 21, 2011, 12:27:39 PM »
I found that there is in pak128 very bothering (quite long) time space between old and new bus terminal (end-station).

It would be good to:
1. improve retire_year of old bus terminal
or
2. make one another which will be available between old and new one

-->
The first one is from add-on I use. I am sorry. - So point 1 is nonsense - and point 2 stays - but with setting intro_year to year for example 1900.
« Last Edit: July 03, 2011, 07:34:59 AM by VaclavMacurek »

Offline VS

  • Senior Plumber (Devotee)
  • Devotee
  • *
  • Posts: 4855
  • Vladimír Slávik
    • VS's Simutrans site
  • Languages: CS,EN
Re: Time space between two bus terminals
« Reply #1 on: July 13, 2011, 10:48:20 PM »
Sorry for taking so long, I just found some time :) As to the problem itself... The graphic does not really fit year 1900. I would gladly add another terminal for earlier use, if there was some passable picture.

Offline Václav

  • Devotee
  • *
  • Posts: 3230
  • formerly VaclavMacurek
  • Languages: CZ, EN
Re: Time space between two bus terminals
« Reply #2 on: July 14, 2011, 07:37:11 AM »
I think I know about one - Nemo's one. With re-setting of retire_year it would be good.